Industry News

  • CNC machining tool over cutting

    In the processing, often in the corner of the spring knife and lead to the phenomenon of cutting, if the use of reasonable tools and processing methods, can reduce the opportunity of the spring knife. The relation of tool deformation is:   From the above formula, we can know that there are t...
    Read more
  • Vibration occurrence during the CNC Milling process

    In CNC milling, vibration may occur due to the limitations of cutting tools, tool handles, machine tools, workpieces or fixtures, which will have a certain adverse effect on machining accuracy, surface quality and processing efficiency.To reduce cutting vibration, the relevant factors need to be ...
    Read more
  • Let’s see how the boring should be done

    Let’s see how the boring should be done

    The precision of boring is very high, the dimensional precision of fine boring can reach IT8~IT7, and the aperture can be controlled within 0.01mm precision.If it is fine boring, the machining precision can reach TT7-IT6, and the surface quality is good.For general boring, the surface roughness R...
    Read more
  • CNC tools material selection

    CNC tools material selection

    At present, the widely used CNC tool materials mainly include diamond tools, cubic boron nitride tools, ceramic tools, coated tools, carbide tools and high-speed steel tools.There are many grades of cutting tool materials and their properties vary greatly.The main performance indexes of various t...
    Read more